Maintenance; Spare Parts - WAGNER WallPerfect I-Spray W 665 Translation Of The Original Operating Instructions

WallPerfect W 665 I-Spray
Attention: Position of needle must be congruent with the nozzle aperture.
(Fig.15)
6) Put the air cap (Fig. 16, 3) onto the nozzle (4) and tighten it using the union nut (2).
7) Position the adjustment ring (fig. 17, 1) on the union nut so that the recesses on the
adjustment ring can snap into both horns on the air cap.
8) Place the container seal from below on the suction tube and slide it over the collar,
while turning the container seal slightly.
9) Insert the suction tube with container seal in the gun body.

16. Maintenance

WARNING! Never operate the machine without the air filter; dirt could be sucked
in and interfere with the function of the machine.
Disconnect plug before changing parts.
•
Change the air filter if it is soiled. Use a screwdriver to lever the cover fastening from
the unit (Fig. 18, arrow).
•
Insert a new air filter into the compartment (Fig. 18, 1).
•
Replace the cover on the unit until it latches.
In order to mount the gun more easily apply lubricating grease (enclosed) liberally
to the O-ring at the gun front part (Fig. 19, 7).

17. Spare Parts

Pos. Name
1 WallPerfect I-Spray spray attachment incl. 1800 ml container
2 Spray jet adjustment ring
3 Union nut
4 Air cap
5 Nozzle
6 Nozzle seal (2 pcs.)
7 O-ring
8 Ventilating hose, valve cover, diaphragm
9 Container seal
10 Suction tube
11 Container with cover 1800 ml (only for WallPerfect spray
attachment)
12 Handle
13 Air hose
14 Carrying belt
15 Air filter
16 Cover
Spare Parts List (Fig. 19)
GB
Order No.
2326 477
2328 900
2328 903
2328 905
2328 908
2304 433
0417 308
2304 027
2328 919
2328 922
2304 025
2303 300
2303 410
0414 204
0414 700
0414 302
27