WAGNER WallPerfect W665 Overview
Hide thumbs Also See for WallPerfect W665:

Advertisement

2 Jahre
Garantie
2 years
WARRANTY
2 ans de
WallPerfect
GARANTIE
2 ans de
W 665
GARANTIE
D/GB/F/NL

Advertisement

Table of Contents
loading

Summary of Contents for WAGNER WallPerfect W665

  • Page 1 2 Jahre Garantie 2 years WARRANTY 2 ans de WallPerfect GARANTIE  2 ans de W 665 GARANTIE D/GB/F/NL...
  • Page 2 WallPerfect W 665 Übersicht / Overview / aperçu général / Overzicht 11/12...
  • Page 3 WallPerfect W 665 Click...
  • Page 4 WallPerfect W 665 20-30 cm...
  • Page 5 WallPerfect W 665 ersatzteile / spare parts / pièces de rechange / Onderdelen 12 B 12 A 12 A 12 B...
  • Page 6: General Safety Instructions

    WallPerfect W 665 Congratulations on purchasing your WAGNER spray guns. You have purchased a proprietary device that requires careful cleaning and care to ensure trouble-free functioning. Read the operating instructions carefully before using the tool and observe the safety instructions. Keep the operating instructions in a safe place.
  • Page 7 WallPerfect W 665 3. Safety of Persons Be attentive. Pay attention to what you are doing and work sensibly with a power tool. Do not use the tool if you are tired or under the influence of drugs, alcohol or medication. Just a moment of inattentiveness while using the tool can lead to serious injuries.
  • Page 8 WallPerfect W 665 Take proper care of your tools. Check whether the moving parts function trouble­free and do not jam, whether parts are broken or damaged so that the tool function is impaired. Have damaged parts repaired before using the tool. Many accidents have their origin in power tools that have been maintained badly.
  • Page 9: Technical Data

    1/2 hour. Eliminate the cause of heating, e.g. bent hose, soiled air filter, slots for air intake covered. With original WAGNER accessories and spare parts, you have the guarantee that all safety regulations are fulfilled. Technical Data Max.
  • Page 10: Preparation Of The Workplace

    WallPerfect W 665 acidic coating substances. Materials with a flash point below 21°C. The following materials can only be processed with optional accessories: Water- and solvent-based paints, finishes, primers, 2-component paints, clear finishes, automotive finishes, staining sealers and wood sealer-preservatives. Preparation of the workplace Cover all surfaces and objects that should not be sprayed, or remove them from the work area.
  • Page 11: Selecting The Spray Setting

    WallPerfect W 665 • Connect the front part with the rear part of the gun. (Fig. 5) • Mount the air hose (Fig. 4, a + b). Insert the air hose firmly into the connection of the unit and the gun handle. The position of the hose is not relevant. •...
  • Page 12: Interruption Of Work

    WallPerfect W 665 • Move the spray gun evenly cross-wise or up-and-down, depending on the spray pattern setting. • An even movement of the spray gun results in an even surface quality. • If nozzle and air cap are soiled, clean both parts with water and solvent. "Cross spray"...
  • Page 13: Maintenance

    WallPerfect W 665 Assemble the parts again (see “Assembly”). Assembly The unit may only be operated with an integer diaphragm (Fig. 12 A, 16). Place the diaphragm with the pin facing upwards on the bottom section of the valve. Also see the marking on the gun body.
  • Page 14: Environmental Protection

    For processing interior wall paint 2301 734 We recommend against using the WallPerfect spray attachment with the W550. Further information about the WAGNER range of products for renovating is available under www.wagner­group.com Environmental protection The appliance and accessories should be recycled in an environmentally friendly way.
  • Page 15: Correction Of Malfunctions

    WallPerfect W 665 Correction of Malfunctions Problem Cause Remedy • No coating material Nozzle clogged Clean ➞ • emerges from the Material volume setting Turn to the right (+) ➞ nozzle turned too far to the left (-) • No pressure build-up in Tighten container ➞...
  • Page 16 WallPerfect W 665 Problem Cause Remedy • Paint in the Diaphragm soiled Clean the diaphragm ➞ • ventilating hose Diaphragm defective Replace the diaphragm ➞ • Poor covering Spray material is too cold Heat spray material ➞ maximum 40°C) capacity on the wall •...
  • Page 17 Wearing parts are also excluded from the guarantee. The guarantee excludes commercial use. We expressly reserve the right to fulfil the guarantee. The guarantee expires if the tool is opened up by persons other than WAGNER service personnel. Transport damage, maintenance work and loss and damage due to faulty maintenance work are not covered by the guarantee.
  • Page 18: Ce Declaration Of Conformity

    98/37/EG; 2006/95/EG; 2004/108 EG; 2002/95/EG; 2002/96/EG En normatieve dokumenten: EN 55014-1: 2006, EN 55014-2: 2001, EN 61000-3-2: 2006, EN 61000-3-3: 2005, EN 60335-1: 2006, EN 50366: 2006; EN 50144-2-7: 2000 J. Wagner GmbH Otto-Lilienthal-Str. 18 W. van der Hoeven i. V. J. Ulbrich...
  • Page 19 WallPerfect W 665...
  • Page 20 301 62 Plzen Hotline 0180/1000 227   +49/75 44/505-169  +420 376 709 205  +420 376 709 263 J. Wagner Spraytech Ibérica S.A. Wagner Spraytech Belgie Ctra. N-340, Km 1245,4 Veilinglaan 58 08750 Molins de Rei (Barcelona) 1861 Meise­Wolvertem ...

Table of Contents