Tower Mounting - Tripp Lite SmartOnline SUPDMB5 Owner's Manual

Installation

Tower Mounting

WARNING!
All UPS systems are extremely heavy. Use caution when lifting and mounting. User must properly stabilize the UPS
when lifting and mounting.
Your UPS can be mounted in an upright tower position with optional base stands sold separately by Tripp Lite (model: 2-9USTAND). When
mounting the UPS on adjustable base stands, make sure the LCD panel is facing toward the top.
The LCD panel may be rotated for easier viewing while the UPS is upright. To rotate, insert a small screwdriver or other flat-edge tool into
the slots on any side of the LCD panel. Pop the panel out, rotate accordingly and snap it back into place.
WARNING: Display circuitry is not isolated. Display rotation must be performed only by qualified electrical service
personnel.
To attach the PDM unit, use the included screws to attach the Tower Mounting Plate to the UPS
connectors with the connectors on the UPS
the thumbscrews to secure both sides of the PDM unit to the UPS via the Tower Mounting Plates
A
PDM Outlet Configuration
will Vary by Model
EXTERNAL BATTERY CONFIGURATION NOTE
If external battery packs are to be used with this UPS, install them following the mounting/installation documentation included with each
battery pack.
These SmartOnline UPS systems support automatic detection of up to four compatible Tripp Lite Smart battery packs. Each Smart battery
pack includes a wired data connection that enables automatic detection and configuration for up to four Smart external battery packs to
the UPS. If more than four external battery packs need to be configured, all packs must be configured via the Tripp Lite external battery
configuration software connecting though the UPS serial port. In this configuration, do not connect the Smart battery communication cables
to any of the external battery packs.
B . A green pin will appear on the PDM's front panel to indicate a proper connection
A
14
. Align and mate the PDM's blindmate
A
.
D
D
C
PDM Outlet Configuration will Vary by Model
. Use
C
B
D
B
B