Ups Circuit Block Diagram - Tripp Lite SmartOnline SUPDMB5 Owner's Manual

Single-phase rack-mount online ups with built-in lcd monitoring, control screen and detachable bypass power distribution module

Table of Contents

Available languages

Important Safety Instructions

• Do not short or bridge the battery terminals with any object.

• Remove battery grounds during installation and maintenance to reduce likelihood of shock.

• Remove the connection from ground if any part of the battery is determined to be grounded.

External Battery Warnings

• Connect external battery ground wire before connecting external battery to UPS.

• For external battery configuration, see the Operations section for options and configuration method. Smart battery packs are

automatically detected by the UPS.

• Fuses should be replaced only by factory authorized personnel. Replacement fuses should be of the same rating and type.

• For extended runtime, only use compatible Tripp Lite battery modules:

• BP192V12RT3US External Battery Pack

Battery Replacement and Recycling

Tripp Lite products use sealed lead-acid batteries, which are highly recyclable. Refer to your local codes for disposal requirements,

Call Tripp Lite at +1.773.869.1234 or visit tripplite.com/support/recycling-program for more information on recycling the batteries

or any other Tripp Lite product.

Tripp Lite offers a complete line of UPS System Replacement Battery Cartridges (R.B.C.).Visit Tripp Lite on the Web at

tripplite.com/products/battery-finder/ to locate the specific replacement battery for your UPS.

Maintenance Warnings

• Your UPS does not contain user-serviceable parts. Do not disassemble.