Removing A Side Panel - LG LSE3090ST Service Manual

30” freestanding electric range
Hide thumbs Also See for LSE3090ST:
Table of Contents

Advertisement

WARNING
!
• DISCONNECT power supply cord
from the outlet before servicing.
• Replace all panels and parts before
operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal
injury, death or electrical shock.
CAUTION
!
• Be careful when you work on the
electric range handling the sheet
metal part.
- Sharp edge may be present and you can cut
yourself.
1. Turn off the electrical supply going to the range.
2. Remove the oven door from the range
(see page 3-16)
3. Pull the range away from the wall.
4. Remove the back cover of the range
(see page 3-2)
5. Pull the controller from the range.
(see page 3-4)
6. Remove the cooktop (See page 3-7)
7. Remove the two screws from the left or right side
panel.
COMPONENT ACCESS
REMOVING A SIDE P
REMOVING A SIDE P
ANEL
ANEL
8. Pull the back of the side panel out from the range
approximately 10˚.
9. Push forward and remove the side panel.
3-17

Advertisement

Table of Contents
loading

Table of Contents