Removing A Side Panel - LG LDE4415ST Service Manual

WARNING
• DISCONNECT power supply cord
from the outlet before servicing.
• Replace all panels and parts before
operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal
injury, death or electric shock.
CAUTION
• Use caution when handling sheet
metal parts while servicing the
range.
- Some parts may have sharp edges, which
could result in injury.
1. Turn off the electrical supply going to the range.
2. Remove the oven door from the range
(see page 3-17 for the procedure).
3. Pull the range away from the wall so you can
access the back of the unit.
4. Remove the control cover and back cover.
(see step 3 on page 3-2 & page 3-8 for the
procedure)
5. Raise the cooktop (see page 3-4 for the
procedure). NOTE: Position the side of the
cooktop so that it does not rest on the side panel
that you are removing.
6. Remove the 4 screws from the top rear of the
side panel.
COMPONENT ACCESS

REMOvING A SIDE PANEL

7. Remove the 4 screws from the left or right side
panel.
8. Pull the back of the side panel out from the range
approximately 10˚.
3-27