Table of Contents
Advertisement
6c. Threshold fine
adjustment
6d. Judgment result (After
the fine adjustment)
[FEED] key "6c.
[RESTART] key "2. Pause state." (Threshold setting is completed.)
[PAUSE] key "6b.
7. Threshold setting:
7a. Judgment result (NG)
[FEED] key "3. Media sensor selection." (Threshold is set again.)
[RESTART] key "2. Pause state." (Threshold setting is completed.)
[PAUSE] key "7b.
7b. Details of the r
esult
THRESHOLD <REFL.>
1.0
V
( 0.0
-
4.0 V)
Press any of the [PAUSE] key.
1）REFL.(PRE-PRINT)
Result:
OK (Mid.)
Threshol
Baseline
◀Adjust
Threshold fine adjustment
Details of the r
esult." (Result and the threshold value are displayed.)
1）REFL.(PRE-PRINT)
Result:
Failed (1)
×
×
Threshol
Baseline
Retry FEED
Details of the r
esult." (Result and the threshold value are displayed.)
1）REFL.(PRE-PRINT)
Peak
: 2.1V
Threshold : 1.3V
Baseline : 1.2V
◀Result
[LEFT] key: Go to "7a. Judgment"
Operation is same as 8.7.3
THRESHOLD LEVEL
Detail▶
." (The threshold value is fine adjusted again.)
Detail▶
23
.
Advertisement
Table of Contents
