Shark VACMOP Owner's Manual page 3

Your VACMOP™ unit comes partially assembled with a cord connecting the parts. All versions assemble the
same way. This appliance is for Household use only.
1. Align and insert the Handle into the top of the Pole. You will feel it click in place.
2. Align and insert the pole into the Main Body. You will feel it click in place.
For proper operation, ensure all components are completely connected and clicked into place.
Handle
1.
(Click)
Pole
2.
(Click)
Main
Body
NOTE: The model and serial numbers can be found on the QR code label on the back on the main body.
s h a r kc l e a n . c o m
ASSEMBLY
Hanging
Loop
Spray
Vacuum
Button
Trigger
Reservoir
Lid
LED
Indicator
Charging
Connector
Spray
Nozzle
Pad
Release
Spray Button
Vacuum Trigger
VACUUM TRIGGER AND SPRAY BUTTON
ATTACHING AND REMOVING PADS
INSTALL PAD
Place the VACMOP™ Disposable Pad on the floor
with the dust chamber up. Line up the front edge
of the VACMOP into the plastic bumper on the pad.
Holding the handle, press the VACMOP base down
until the pad clicks into place.
CONTROLS
Spray Button
Press and hold the spray button on top of the handle to
dispense cleaning solution through the spray nozzle.
Vacuum Trigger
To vacuum, pull the trigger and hold it in.
PAD DISPOSAL
Dispose of dirty pads by releasing them directly
into the trash.
To detach the pad, press the release button on the
side of the VACMOP base.
s h a r kc l e a n . c o m