Table of Contents
Advertisement
Parallel Port DMA
This feature needs to be configured only when Parallel Port Mode is set
to the ECP mode. When Parallel Port is set to Auto, the field will show
Auto indicating that BIOS automatically determines the DMA channel for
the parallel port.
OnBoard Midi Port
The field specifies the base I/O port address for the onboard Midi Port.
Midi IRQ Select
The item is used to select the IRQ line for onboard Midi port.
OnBoard Game Port
This item is used to specify the address for the onboard game port.
USB Device
This setting is used to enable/disable the onboard USB controllers. Setting
options: Enabled, Disabled.
USB Device Legacy Support
Set to Enabled if your need to use any USB device in the operating system that
does not support or have any USB driver installed, such as DOS and SCO Unix.
Setting options: Disabled, Enabled.
Audio/Modem Device
This setting is used to enable/disable the onboard audio/modem controller.
Disable the controller if you want to use other controller cards to connect an
audio/modem device. Setting options: Enabled, Disabled.
On-Chip IDE
This setting controls the on-chip IDE controller. Setting options: Disabled,
Primary, Secondary, Both.
3-21
BIOS Setup
Advertisement
Table of Contents
