Table of Contents
Advertisement
Chapter 4. Using Web Viewer
■Sequence Setup
You can configure detailed sequence settings for each camera mode. Available camera
modes are Swing, Group, Tour, Trace, and Auto Run, and they are described in the chart
below.
Category
Swing
Commands the camera to move between 2 selected presets, monitoring the route.
Recalls groups of multiple preset locations consecutively. A group can contain up to
Group
255 presets.
Recalls groups of presets consecutively in an orderly manner. Up to 6 groups can be
Tour
listed for this function.
Trace saves and reactivates patterns of custom camera movements. Up to 4
movement patterns can be memorized.
Trace & Auto Run
Auto Run commands the camera to automatically perform a preset sequence action if
no command has been entered via the controller for a while.
NETWORK PTZ CAMERA
Description
User Manual
78
Advertisement
Table of Contents
