Baud Rate Settings
•
Select the transfer speed of a selected communication protocol.
No.
Baud Rate(BPS)
1
2,400
2
4,800
3
9,600
4
19,200
Communication Method Settings
•
Select a communication method for the camera.
SW2- #7
Communication Response Settings
•
Select a communication response method for the camera and controller: Response or No
Response.
SW2- #8
Termination Settings
•
To prevent the attenuation of communication signals between the camera and controller, the
items at the end of line must be set up with the termination settings.
Camera Input Position
Termination of Longest Path
On the Path
* This model is provided with factory defaults of all DIP switches set to OFF. The default
settings are shaded in the table.
SW2-#5
Function
Transfer Mode Switch
Function
Response Mode Switch
SW2- #10
ON
OFF
NETWORK PTZ CAMERA
21
ON
ON
OFF
OFF
ON
RS-422(4Wire)
ON
Response
User Manual
SW2-#6
ON
OFF
OFF
ON
OFF
RS-485(2Wire)
OFF
No Response
SW2- #11
ON
OFF