Samsung SNP-3370TH User Manual page 40

Chapter 3. Installing Camera & Network Setup
3. In the <Address> pane, provide the
necessary information.
MAC (Ethernet) Address : The MAC
(Ethernet) address of the applicable camera
will be set automatically so you don't need
to input it manually.
If using an IP router
•
IP Address : Enter an address falling in the
IP range provided by the IP router.
ex) 192.168.1.2~254, 192.168.0.2~254,
192.168.XXX.2~254
Subnet Mask : The <Subnet Mask> of the
IP router will be the <Subnet Mask> of the
camera.
Gateway : The <Local IP Address> of the IP
router will be the <Gateway> of the
camera
Notes
• T he settings may differ depending on the connected IP router model.
For more information, refer to the user manual of the applicable router.
If not using an IP router
•
For setting <IP Address>, <Subnet
Mask>, and <Gateway>, contact your
network administrator.
4. In the <Port> pane, provide
necessary information.
HTTP Port : Used to access the camera
using the Internet browser, defaulted to 80.
Use the spin button to change the HTTP Port value.
VNP Port : Used to control the video signal transfer, defaulted to 4520.
NETWORK PTZ CAMERA User Manual
40