Samsung SNP-3370TH User Manual page 39

Item
IPv4
IPv6
Search
Auto Set
Manual Set
Exit
Notes
Use IP Installer version 1.44 or higher.
•
Static IP Setup
Manual Network Setup
•
Run <IP Installer_v 1.44.exe> to display the camera search list.
At the initial startup, both [Auto Set] and [Manual Set] will be grayed out.
Notes
For cameras found with the IPv6 setting, these buttons will be grayed out
•
as the cameras do not support this function.
1. Select a camera in the search list.
Find the MAC (Ethernet) address labeled on
the rear of the camera.
Both the [Auto Set] and [Manual Set]
buttons will be activated.
2. Click [Manual Set].
The Manual Setting dialog appears.
The default values of <IP Address>, <Subnet Mask>, <Gateway>, <HTTP Port> and
<VNP Port> of the camera will be displayed.
The default <Password> is "4321".
Scans for cameras with the IPv4 setting.
Scans for cameras with the IPv6 setting.
Scans for cameras that are currently connected to the network.
However, this button will be grayed out if neither IPv4 nor IPv6 is checked.
The IP Installer automatically configures the network settings.
You should configure the network settings manually.
Exits the IP Installer program.
NETWORK PTZ CAMERA
39
Description
User Manual