Dynamic IP Setup
Dynamic IP Environment Setup
•
Example of the Dynamic IP environment
- If an IP router, with cameras connected, is assigned an IP address by the DHCP server
- If connecting the camera directly to modem using the DHCP protocols
- If IPs are assigned by the internal DHCP server via the LAN
Checking the Dynamic IP
•
1. Run the IP Installer on the user's local
machine to display cameras allocated with
<Dynamic IP> addresses in the list.
2. Select a camera in the list, and click
[Manual Set] to check the <Dynamic IP>
of the camera.
If you uncheck <DHCP>, you can change
IP or <Port> to <Static>.
Connecting to the Camera from a Shared Local PC
1. Run the IP Installer.
It will scan for connected cameras and
display a list of them.
2. Double-click a camera to access.
The Internet browser starts and connects to
the camera.
Notes
• A ccess to the camera can also be gained by typing the camera's IP
address in the address bar of the Internet browser.
NETWORK PTZ CAMERA
43
User Manual