Sound Setting Mode - Sharp 28HW-53H Operation Manual

Sharp 28hw-53h: operation manual
Hide thumbs Also See for 28HW-53H:
Table of Contents

Advertisement

Sound Setting Mode

Sound quality is adjustable in this menu.
1.
Press the MENU button
2.
Press the GREEN button
Menu.
AUDIO EFFECTS Menu
3.
Press the Cursor LEFT/RIGHT buttons
AUDIO MODE: Bypass or Spatial expander.
The AUDIO EFFECTS Menu depends on the AUDIO MODE as
indicated below:
AUDIO MODE: Bypass
Bypass: Normal sound without sound effect.
1.
Press the Cursor UP/DOWN buttons
Automatic volume correction [ ]. The red point mark indicates the
selected parameter.
2.
Press the Cursor LEFT/RIGHT buttons
different levels: Short, Middle or Long.
Select Off to deactivate the Automatic volume correction.
AUDIO MODE: Spatial expander [ ]
1.
Press the Cursor UP/DOWN buttons
Automatic volume correction or Spatial strength.
2.
Automatic volume correction: Press the Cursor LEFT/RIGHT
C
I
buttons
/
to select three different levels: Short, Middle or Long.
Select Off to deactivate the Automatic volume correction.
3.
Spatial strength: Adjust the sound quality to your liking with the
Cursor LEFT/RIGHT buttons
About Automatic volume correction
Different sound sources, fairly often do not have the same volume level, for example the changing from movie to the
advertisements. The Automatic Volume Correction (AVC) solves this problem and equalizes the volume levels.
About Spatial expander
The kind of Spatial expander effect depends on the source mode. If the incoming signal is in mono mode, Pseudo
Stereo Effect is active; for stereo signals, Stereo Basewidth Enlargement is effective.
The Pseudo stereo effect cannot restore any room or panning information from a mono signal. It does, however
produce two uncorrelated output signals which can give a dramatic improvement to mono signals without sounding
like a musical effect rather than true stereo.
Spatial strength
When the AUDIO MODE is in Spatial expander effect, you can reduce or enlarge the stereo image by Spatial
strength control.
to see the MAIN Menu.
to see the AUDIO EFFECTS
C
I
/
to change the
E
F
/
C
I
/
to select three
E
F
/
C
I
/
.
MAIN Menu
AUDIO EFFECTS Menu
AUDIO MODE: Bypass
to select
AUDIO MODE: Spatial expander
to select:
16

Advertisement

Table of Contents
loading

This manual is also suitable for:

32hw-53h

Table of Contents