Colour And Sound System - Sharp 14R2F Operation Manual

Colour and Sound System

Switching Systems:
Set the system to AUTO for normal TV reception. The AUTO mode automatically
detects the receiving signal system and changes the reception system of the TV set.
When the picture or sound is not stable, switching to an appropriate system may
improve the picture or sound quality.
1 2
4 5
7 8
0
CH
CH
@
FUNCTION TIMER
SYSTEM NORMAL
!,#
TV
• System indication during reception
<When set to AUTO>
<When set to a specific system mode>
• If approximately 6 seconds pass without a button being pressed, the mode setting is automatically terminated
and the TV set returns to normal mode.
!
Press the SYSTEM button 1 time.
@
Press the VOLUME UP ( ) or
TV/VIDEO
DOWN ( ) button.
COLOUR SYSTEM mode
3
changes as shown on the right
6
each time you press the
9 VOLUME UP ( ) or DOWN ( )
button.
#
Press the SYSTEM button 2
times. The on-screen display
disappears.
• When you select the channel position
PICTURE
to AV by pressing the TV/VIDEO
button, COLOUR SYSTEM mode
changes in the following order:
AUTO
!
Press the SYSTEM button 2
times.
@
Press the VOLUME UP ( ) or
DOWN ( ) button.
SOUND SYSTEM mode changes
as shown on the right each time
you press the VOLUME UP ( )
or DOWN ( ) button.
#
Press the SYSTEM button again.
The on-screen display
disappears.
The colour system is automatically detected and
selected. The selected system appears.
The mark indicates that the colour system is set
manually.
The sound system that was set manually appears.
PAL SECAM
N358 N443
‰ 16