Table of Contents
Advertisement
After preset has been performed
The following features are available for preset channels:
Fine tuning
When a preset programme channel is not exactly tuned, you can fine tune the channel in this mode.
1.
Press the MENU button
2.
Press the BLUE button
3.
Press the Cursor UP/DOWN buttons
«Programme» (red marked).
4.
Press the Cursor LEFT/RIGHT buttons
buttons) to select the programme channel number you want to
tune.
5.
Press the Cursor UP/DOWN buttons
tune» (red marked).
6.
Press the Cursor LEFT/RIGHT buttons
picture for the best quality.
7.
Repeat the above procedure (3. ~ 6. steps) for other programme
channels as required.
8.
Press the MENU button
Mode
This feature allows you to select TV, FILTER, VCR or SKIP.
1.
Press the MENU button
2.
Press the blue button
3.
Press the Cursor UP/DOWN buttons
«Programme» (red marked).
4.
Press the Cursor LEFT/RIGHT buttons
buttons) to select the programme channel number you want to
set.
5.
Press the Cursor UP/DOWN buttons
«Mode» (red marked).
6.
Press the Cursor LEFT/RIGHT buttons
"FILTER" "VCR" or "SKIP".
TV:
If the TV signal is weak the image can shake.
In this case put it in TV mode.
FILTER: This mode can be convenient when the level of the
signal received is weak.
VCR:
In some cases, the upper part of the picture may be
distorted when receiving signal from a VCR via RF
terminal on the TV set.
Selecting this option will help to reduce this effect.
SKIP:
Allows you to SKIP channels you do not want to view
when using channels selector buttons
7.
Repeat the above procedure (3. ~ 6. steps) for other programme channels as required.
8.
Press the MENU button
to see the MAIN Menu.
to see the TUNE Menu.
E
F
/
to select
C
I
/
(or 0 ~ 9 digit
E
F
/
to select «fine
C
I
/
to adjust the
to clear the on-screen display.
to see the MAIN Menu.
to see the TUNE Menu.
E
F
/
to select
C
I
/
(or 0 ~ 9 digit
E
F
/
to select
C
I
/
to select "TV"
E
to clear the on-screen display.
MAIN Menu
TUNE Menu
MAIN Menu
TUNE Menu
F
/
.
30
Advertisement
Table of Contents
