Sound Setting Mode - Sharp 32JF-77H Operation Manual

Sound Setting Mode

Sound quality is adjustable in this menu.
QUICK AUDIO MODE
1. Press the MENU button
2. Press the GREEN button
AUDIO MODE:
BYPASS [ ] / DOLBY VIRTUAL [ ] / SPATIALIZER MOVIE [ ] /
SPATIALIZER MUSIC [ ].
3. Press the MENU button
Audio effects
1. Press the MENU button
2. Press the GREEN button
Menu.
Audio EFFECTS Menu
3. Press the Cursor LEFT/RIGHT buttons
AUDIO MODE:
BYPASS [ ] / VIRTUAL DOLBY [ ] / SPATIALIZER MOVIE [ ] /
SPATIALIZER MUSIC [ ].
4. Press the GREEN button
levels to default factory setting.
In this menu you can switch to the following menus:
Press the RED button
Press the YELLOW button
Menu. This menu is available only when you are watching the TV-set
through the external sources.
Press the BLUE button
Press the Help button
5. Press the MENU button
About BYPASS: normal sound without sound effect.
About VIRTUAL DOLBY: home theatre surround systems normally use five speakers: three across the front (L,
C, R) and two surround speakers on the sides. A virtual surround system attempts to create the same surround
effect produced by a multichannel system using only the left and right speakers.
The general conceptual model of a virtual surround system employs two steps to reduce the L, C, R, and S (or
LS, RS) channels to two channels:
1. Divide the centre signal equally between the left and right speakers to achieve a phantom centre image.
2. Process the S (or LS, RS) signal via a virtualizer before sending it to the L, R speakers, creating a virtualized
image around the listener.
Note: Left, centre, right, and mono surround channels will be abbreviated L, C, R, S, respectively.
Left surround and right surround will be abbreviated LS and RS, respectively.
About SPATIALIZER effect: This sound reproduction mode is intended to get surround effects. The surround
effects enables the consumer to chose from two possible environments, the range of effects current available
include the next:
SPATIALIZER MOVIE: This mode has been designed to be use when watching movies.
SPATIALIZER MUSIC: This mode has been designed to be use when watching a musical event.
Note: It is highly recommended to set the DOLBY VIRTUAL mode when the TV is receiving a "Dolby Digital 5.1"
signal through the DIGITAL AUDIO INPUT terminal.
once to see the QUICK Menu.
several times to change the
to close the QUICK Menu.
twice to see the MAIN Menu.
to see the Audio EFFECTS
C I
/ to change the
if you wish to normalize audio
to see the Audio LEVELS Menu.
to see the Audio INPUT SELECT
to see the STEREO Menu.
to see the Interactive Help.
to close the Menu.
QUICK Menu
MAIN Menu
Audio EFFECTS Menu
LEVELS LEVELS
RED
25
GREEN
GREEN
AUDIO MODE
BYPASS
NORMALIZER STEREO
NORMALIZER INPUT SELECT INPUT SELECT STEREO
GREEN
YELLOW BLUE