Table of Contents
Advertisement
C
WD90K6410OX_03745E-02_EN.indd 21
C
E
3. Hold the adaptor and turn part (C) in the
arrow direction to loosen it by 5 mm (*).
4. Insert the adaptor into the water tap,
and tighten the screws while lifting up
the adaptor.
5. Turn part (C) in the arrow direction to
tighten it.
6. While holding down part (E), connect the
water hose to the adaptor. Then, release
part (E). The hose fits into the adaptor
with a clicking sound.
7. If you are using a screw type of water
tap, use the provided screw-type
adaptor to connect to the water tap as
shown.
English 21
2016/11/10 17:01:09
Advertisement
Table of Contents
