Regency LSC7236 Instructions page 2

LEGACY STORAGE CABINET • LSC7236 • INSTRUCTIONS
STEP 1 : Attach front
support(N) to middle
support(O) by inserting
the dowel rod on the
end of(O) into
the middle of(N).
STEP 3 : Insert 2 cam pins(F) into back(M)
and connect(M) to bottom(P) by inserting and
locking cams (
Fig1).
F
M
F
STEP 5 : Attach left(Q) and right(R) side to
back(M) and bottom(P) by inserting and lock-
ing cams located on (
Q
IMPORTANT NOTICE:
● Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
● Check to be sure that you have all parts and hardware.
● Remove all wrapping materials, including staples & packing straps before you start to assemble.
● Do not tighten all screws/bolts until completely assembled.
● Keep all hardware parts out of reach of children.
Any problems or questions call Regency Office Furniture at 1-866-816-9822 or email customerservice@regencyof.com
N
O
P
M
Fig1)
M
R
P
STEP 2 : Connect dowel rods on
Front support(N)
and Middle support(O)
to the bottom(P).
Cam locks on(P) facing (N)
STEP 4 : Insert 4 cam pins(F) into both
left(Q) and right(R) side.
R
F
F F
P
O
N
F
Q
F
F F