Table of Contents
Advertisement
[3]
[2]
F-10-17
10.4.2.4 Removing the Pickup Tray
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
1) Detach the open/close cover, or open the open/close cover by removing
the open/close cover stopper.
2) Remove the left and right shafts [1] of the pickup tray, and then remove
the pickup tray [2].
F-10-18
10.4.3 ADF Drive Unit
10.4.3.1 Removing the Drive Unit
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
[1]
[1]
[2]
1) Remove the feed frame unit.
2) Remove the three screws [1], and then remove the drive unit [2].
When reinstalling the drive unit, make sure that the pickup solenoid lock
plate [1] is engaged with the gear.
10.4.4 Feed Frame Unit
0013-1249
10.4.4.1 Removing the Feed Frame Unit
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
1) Detach the front cover, the rear cover, the open/close cover and the pickup
tray.
2) Disconnect the five connectors [1].
[1]
3) Remove the two front screws [1], two rear screws [2], and two grounding
screws [3] to remove the feed frame unit [4].
0013-1250
Chapter 10
[1]
[2]
F-10-19
[1]
F-10-20
[1]
[1]
F-10-21
0013-1443
10-9
Advertisement
Table of Contents
