Technical Specifications - Hifonics MERCURY I/2000 User Manual

ENGLISH

TECHNICAL SPECIFICATIONS

Model
Channels
Circuit
OUTPUT POWER RMS @ 14.4 V
Watts @ 4 Ohms
Watts @ 2 Ohms
Watts @ 1 Ohms
Loudspeaker Impedance
Frequency Range –3dB
Damping Factor
Signal-to-Noise Ratio
THD+N
Input Sensitivity
Filter Section
Sub Sonic Filter
Low Pass Filter
Bass Boost
Phase Shift
High Level Inputs with EPS
Auto Turn On
Low Level RCA Inputs
Bass Level Remote Controller
Recommended fuse (external)
4 Ohms Operation
2 Ohms Operation
1 Ohm Operation
Dimensions
All Specifications are subject to change
DISPOSAL
If you have to dispose the device, please note that no electronic devices may be disposed in the
household waste. Dispose the device in a suitable recycling facility in accordance with local waste
regulations. If necessary, consult your local authority or your dealer.
18
MERCURY I/2000
1
Digital Class D
1 x 800
1 x 1400
1 x 2000
1 - 8 Ohms
10 - 150 Hz
> 240
103 dB
< 0,01 %
Low Level: 3 - 0,1 V
High Level: 24 - 1 V
10 - 35 Hz
40 - 150 Hz
0 - 12 dB @ 45 Hz
0 - 180°
Via the included 5-pin wire harness
Only in connection with High Level Inputs (DC Offset)
Yes
Yes
1 x 80 A
1 x 130 A
1 x 200 A (included)
205 x 46 x 348 mm