ENGLISH
TECHNICAL SPECIFICATIONS
Model
Channels
Circuit
OUTPUT POWER RMS @ 14.4 V
Watts @ 4 Ohms
Watts @ 2 Ohms
Watts @ 4 Ohms bridged
Loudspeaker Impedance
Frequency Range –3dB
Damping Factor
Signal-to-Noise Ratio
THD+N
Input Sensitivity
Channel 1/2 FRONT
Crossover Modes
High or Low Pass Filter
Channel 3/4 REAR
Crossover Modes
High or Low Pass Filter
Start-stop capability
High Level Inputs with EPS
Auto Turn On
Fuse Rating
Dimensions
All Specifications are subject to change
DISPOSAL
If you have to dispose the device, please note that no electronic devices may be disposed in the
household waste. Dispose the device in a suitable recycling facility in accordance with local waste
regulations. If necessary, consult your local authority or your dealer.
INTENDED USE
This product is only designed for use in a vehicle with 12 volt on-board voltage and negative ground and func-
tions as an amplifier for audio signals. Any other use may lead to damage to the product or in the vicinity of
the product.
20
ZXS700/4
4
Digital Class D
4 x 115
4 x 175
2 x 350
2 - 8 Ohms
4 - 39000 Hz
> 300
107 dB
< 0,02 %
5 - 0,2 V
Full - HP - LP
50 - 5000 Hz
Full - HP - LP
50 - 5000 Hz
8,5 V
Yes
Voltage rise (DC) or signal detection (VOX)
1 x 80 A (external)
112 x 44 x 230 mm