Technical Specifications; Intended Use - Hifonics PLUTO I User Manual

ENGLISH

TECHNICAL SPECIFICATIONS

Model
Channels
Circuit
OUTPUT POWER RMS @ 14.4 V
Watts @ 4 Ohms
Watts @ 2 Ohms
Loudspeaker Impedance
Frequency Range –3dB
Damping Factor
Signal-to-Noise Ratio
THD+N
Input Sensitivity
Filter Section
Sub Sonic Filter
Low Pass Filter
Bass Boost
Start-stop capability
High Level Inputs with EPS
Low Level RCA Inputs
Auto Turn On
Bass Level Remote Controller
Fuse Rating
Dimensions
All Specifications are subject to change
DISPOSAL
If you have to dispose the device, please note that no electronic devices may be disposed in the
household waste. Dispose the device in a suitable recycling facility in accordance with local waste
regulations. If necessary, consult your local authority or your dealer.

INTENDED USE

This product is only designed for use in a vehicle with 12 volt on-board voltage and negative ground and func-
tions as an amplifier for audio signals. Any other use may lead to damage to the product or in the vicinity of
the product.
16
PLUTO I
1
Digital Class D
1 x 225
1 x 375
2 - 8 Ohms
15 - 250 Hz
> 200
102 dB
< 0,01 %
5,5 - 0,2 V
15 - 50 Hz
50 - 250 Hz
0 - 12 dB @ 45 Hz
> 7 V
Yes
Yes
Yes
Yes
1 x 35 A
115 x 35 x 166 mm