Knobs And Switches; Front Panel Controls - Strymon BRIG User Manual

Knobs and Switches

Front Panel Controls

VOICE
The 3-way toggle switch selects the chip style and configuration�
This affects tonal character and time range:
3205: (left position) 30–300ms� Recreates the character of vintage
delay pedals that used a single low voltage MN3205 BBD chip for
gritty repeats—great for slap back, leads, and sci-fi sounds�
3005: (middle position) 100ms–1 sec� Recreates the character of
vintage delay pedals that used two MN3005 BBD chips at higher
voltage for longer delay times with a dreamy quality�
multi: (right position) Creates complex soundscapes using two
cross-coupled, super-clean BBD delay lines with golden ratio
timing�
TIME
Controls the delay time according to the
selected VOICE� Delay clock is continuously
variable so that turning it while repeats are
happening can produce authentic pitch effects�
FILTER
Adjusts the EQ, noise, and bucket loss of the
repeats based on the selected VOICE�
REPEATS
Varies the number of delay repeats from one
to runaway oscillation�* Set to 3 o'clock for
sustained, infinite repeats without runaway�
*NOTE: Runaway oscillation can get very loud, very quickly! Avoid using short
delay TIME with high REPEATS settings that can create runaway oscillation�
3005
3205
TIME VOICE
FILTER REPEATS
dBucket Delay
hold (tap)
pg 3
multi