Knobs And Switches; Front Panel Controls - Strymon cloudburst User Manual

Knobs and Switches

Front Panel Controls

LED INDICATOR
Lights RED when the effect is engaged� Use
the FOOTSWITCH to engage and disengage the
effect� Also indicates Power Up Mode features�
(See page 8�)
DECAY
Controls the decay time of the reverberated
signal from very short to over 50 seconds� Lower
settings reduce the size of the reverberated
space�
PRE-DELAY
Sets the amount of time before the reverberated
signal appears, an essential control in creating
an accurate and pleasing reverb� For most
natural results, use lower MIX settings when
using higher PRE-DELAY�
FOOTSWITCH
Engages and disengages the effect� The
on at the top of the pedal indicates that the effect
is engaged�
NOTE: Press and hold the
assignments� Please see
You can optionally configure an external footswitch for FREEZE or INFINITE
mode functions� (See
footswitch
to configure Expression Pedal parameter
page 13�
page 16�)
RED LED
pg 3