Knobs And Switches; Front Panel Controls - Strymon ULTRAVIOLET vintage vibe User Manual

Knobs and Switches

Front Panel Controls

MODE
The 3-way toggle switch selects the mix configuration
of the dry and wet signals:
chorus: (left position) combines a 50/50 mix
of dry and wet to achieve maximum depth
and the classic vibe effect
blend: (middle position) combines a 70/30
mix of dry and wet to reduce the depth for a
milder effect
vibrato: (right position) only the wet signal
for a classic, frequency-dependent, phase-
vibrato effect
SPEED
Controls the rate of the LFO sweep�
FOOTSWITCH
Engages and disengages the effect� The
LED on at the top of the pedal indicates that
the effect is engaged�
NOTE: Press and hold the FOOTSWITCH for 2 seconds to enter Save Mode
(see page 23), or to configure Expression Pedal parameter assignments
(see page 11)�
You can optionally configure an external footswitch for TAP or FAVORITE
Mode functionality (see page 16)�
chorus
RED
blend
vibrato
MODE
INTENSITY
SPEED
vintage vibe
pg 3
low