Remove The Sensor Board - Lenovo IdeaPad Pro 5 Hardware Maintenance Manual

Figure 37. Remove the sensor board cable
Go to
https://support.lenovo.com/partslookup
replacement parts:
Sensor board cable
Removable tape

Remove the sensor board

Make sure the following FRUs (CRUs) have been removed.
"Remove the LCD module" on page 40
"Remove the hinge cover" on page 42
"Remove the LCD bezel" on page 43
"Remove the Hinges" on page 43
"Remove the LCD panel" on page 44
"Remove the ToF rubber" on page 47
Step 1. Disconnect cables connected to the sensor board and then remove the sensor board.
Figure 38. Remove the sensor board
Go to https://support.lenovo.com/partslookup
replacement parts:
Sensor board
Removable tape
to look up the Lenovo part numbers of the following
to look up the Lenovo part numbers of the following
.
Chapter 4 Removing a FRU or CRU
49