Remove The Touch Panel Cable And Sensor Board - Lenovo 82R7007TGE Hardware Maintenance Manual

Remove the touch panel cable and sensor board

Make sure the following FRUs (CRUs) have been removed.
"Disassemble the LCD unit" on page 78
"Remove the hinge cover" on page 78
"Remove the LCD panel and EDP cable" on page 78 "Remove the camera" on page 82
Step 1. Peel off the tape.
Figure 91. Peel off the tape
Step 2. Detach the touch panel cable connector then remove the touch panel cable with sensor board.
Figure 92. Remove the touch panel cable with sensor board
Step 3. Disconnect the touch panel cable from the sensor board.
84
Hardware Maintenance Manual