Mounting
5.4 Disassembling the device
5.4
Disassembling the device
Hazardous voltage
Can cause death, serious injury, or property damage.
Before starting work, therefore, disconnect the system and devices from the power supply.
Requirement
• All system interface connections are terminated.
• The terminal blocks have been removed or disconnected.
Disassembling the device from a DIN rail
1. Pull the device down until the lower half can be pulled away from the DIN rail.
2. Pull the lower half of the device away from the DIN rail.
3. Lift the device from the upper edge of the DIN rail.
38
WARNING
Equipment Manual, 08/2023, A5E50307927002A/RS-AA/001
3TK2810-0 standstill monitor