Smeg SOPA6301TN Manual page 12

Programmed cooking
Programmed cooking is the function
which allows a cooking operation to be
started at a set time and then ended
after a specific length of time set by the
user.
For safety reasons, it is not possible to
set the end of cooking time by itself
without setting the cooking duration.
1. After selecting a cooking function and
temperature, press the temperature knob.
The display shows
2 Within 3 seconds turn the temperature knob
to set the cooking time (from 1 minute to 13
hours) (e.g. "25 minutes").
3. Press the temperature knob.
The display shows the suggested flashing time
for immediate cooking.
In case of confirmation without
modification, cooking starts
immediately. If time is added to the
suggested time, cooking stops
4. Turn the temperature knob within 3 seconds
to set the end of cooking time (e.g. "13:15").
5. Wait 3 seconds.
The indicator light
14 - USE
.
flashing
and the appliance waits
for the set start time.
The minutes required for preheating are
already included in the end-of-cooking
time.
At the end of the cooking time
flashes on the display and a buzzer will sound
that can be deactivated by opening the door
and/or pressing/turning any of the two knobs.
To delete a programmed cooking
1. Press the temperature knob.
The indicator light
2. Within 3 seconds, turn the temperature knob
clockwise or counter-clockwise to set a new
timed cooking.
The set cooking has now been deleted.
Cooking functions can be interrupted at
any time by turning the function knob to
the 0 position.
Minute minder timer during a cooking
process
The minute minder timer does not stop
the cooking operation but rather informs
the user when the set time has run out.
It is not possible to set a minute minder
during a cooking if a timed cooking has
already been set.
1. After selecting a cooking function and
temperature, press the temperature knob
two times.
The display shows
flashes on the display.
and the indicator
91477A235/B