Preparing The Food Processor For Use; Work Bowl Assembly - KitchenAid ARTISAN 5KFPM770 Operating Instructions And Recipes

Preparing the Food Processor for Use

WARNING
Cut Hazard
Handle blades carefully.
Failure to do so can result in
cuts.
Before First Use
Before using your Food Processor
for the first time, wash the work
bowl, work bowl cover, chef's bowl,
mini bowl, feed tube pusher, discs,
and blades either by hand or in the
dishwasher (see "Care and Cleaning"
on page 15).

Work Bowl Assembly

1. Place the Food Processor base
on a dry, level countertop with
the controls facing forward. Do
not plug in the unit until it is
completely assembled.
2. With the handle just to the left
of center, place the work bowl
on the base, fitting the center
opening over the power shaft.
3. Grasp the work bowl handle and
turn the bowl to the right until it
locks into position.
4. Insert the desired accessory into
the work bowl. See pages 7–11
for accessory instructions.
5. Place the work bowl cover on the
work bowl with the feed tube
just to the left of the work bowl
handle. Grasp the feed tube and
turn the cover to the right until it
locks into place.
NOTE: Do not attach the cover to
the work bowl before the work bowl
is locked on the base. Damage to
the work bowl may result.
6. Fit the 2-piece food pusher into
the feed tube.
Continued on next page
7