Lennox iComfort 10F81 Homeowner's Manual page 21

1. Press and release Wi-Fi in the lower left corner of the HOME screen
indoor temperature
indoor humidity is 41%
system is cooling
Wi-Fi
Wi-Fi
9:39 am May 23, 2012
1
Figure 34. Press Wi-FI
2. Press the Wi-Fi disable button to enable Wi-Fi.
WI-FIL SETTINGS
Thermostat is not connected to the Wi-FI network
WI-FI
disabled
Press to enable /
disable Wi-FI
Figure 35. Enable Wi-FI
3. The User Agreement screens will appear next. Press next as many
times as necessary; then press accept after reading the User
Agreement.
outdoor
temperature
set temp
80
75
heat
or
cool
cool-to
72
fan is
AUTO fan is fan is
Heat-to
AUTO OFF
Zone 1
?
ESTABLISHING A WI-FI CONNECTIONS
There are two methods to setup your Wi-Fi connection. Select either
NETWORK SETTINGS or connection status.
Method 1 — Network Settings Method
enter
1. Press NETWORK SETTINGS; this screen shows a graphical view of
away
buttons representing OPEN and SECURE Wi-Fi networks and a button
for adding a network.
WI-FI SETTINGS
connection status
• Open connection which which requires no password.
• Secure connection which requires Wi-Fi password (security
key).
X
• Add a network is required when Wi-Fi identification (SSID) is
being hidden (not broadcasting). You will need to know the Wi-Fi
network name (SSID), security encryption type (if enabled), and
security password (if security encryption is enabled).
2. When selecting a:
• unsecured connection a screen will appear with two options,
connect and router info. Press connect to continue.
• secured connection a screen will appear requesting the Wi-Fi
network password (security key). There are two options to select
from which are connect and router info. Using the on-screen
keyboard, enter the password (security key) and then press
connect to continue.
iComfort Wi-Fi
Page 21
Thermostat is not connected to the Wi-FI network
WI-FI
NETWORK
connection
SETTINGS
status
enabled
Press to see
press to change
press to enable /
network settings
disable Wi-FI
Must setup a network connection before registering thermostat
Figure 36. Enable Wi-FI
®
7-Day Programmable Communicating Thermostat
X