Precor Experience 700 Line Elliptical Fitness Crosstrainer Series Assembly Manual page 10

Hide thumbs Also See for Experience 700 Line Elliptical Fitness Crosstrainer Series:

To complete the cover assembly:

Secure each side cover using one screw

Position the display front cover so that the two internal hooks are engaged

with the inside bottom of the side covers.

Using both hands, pull the front cover forward to snap it into place.

Figure 15

Figure 16

Figure 17

4. Press the front cover upward to close the gap between the covers and

secure it using two screws

Note If the clip nuts

are missing from your front cover, use the extra

clip nuts included in your hardware kit.

Position the top cover so that the two top latches fit into the top of the side

covers. Rotate it downward into place.

6. Secure it using one screw

To complete the console installation, refer to the installation guide

shipped with your console.

Figure 18

Figure 19

Figure 20

Table of Contents