Yamaha TMax XP500 2012 Owner's Manual page 25

59C-9-E1.book 10 ページ ２０１２年６月２６日 火曜日 午前１１時３３分
ture display "Air", the average fuel con-
sumption mode "AVE_ _._ MPG" and
the instantaneous fuel consumption
mode "MPG" in the following order:
Air  AVE_ _._ MPG  MPG  Air
Ambient temperature display
1
1. Ambient temperature display
This display shows the ambient tem-
perature from –9 C to 40 C in 1 C in-
crements.
For the UK only:
15 F to 104 F in 1 F increments.
The temperature displayed may vary
All manuals and user guides at all-guides.com
INSTRUMENT AND CONTROL FUNCTIONS
from the ambient temperature. Pushing
the right set button switches the ambi-
ent temperature display to the average
fuel consumption and instantaneous
fuel consumption modes.
Average fuel consumption mode
1
1. Average fuel consumption display
The average fuel consumption display
can be set to either "AVE_ _._ km/L" or
"AVE_ _._ L/100 km" (except for the
UK).
For the UK only:
The average fuel consumption is dis-
played "AVE_ _._ MPG".
This display shows the average fuel
3-10
consumption since it was last reset.

When the display is set to "AVE_
_._ km/L", the average distance
that can be traveled on 1.0 L of fuel
is shown.

When the display is set to "AVE_
_._ L/100 km", the average
amount of fuel necessary to travel
100 km is shown.

For the UK only: When the display
is set to "AVE_ _._ MPG", the av-
erage distance that can be trav-
eled on 1.0 Imp.gal of fuel is
shown.
To reset the average fuel con-
sumption display, select it by push-
ing the right set button, and then
push the right set button for at least
one second.
TIP
After resetting an average fuel con-
sumption display, "_ _._" is shown for
that display until the vehicle has trav-
eled 1 km (0.6 mi).