Table of Contents
Advertisement
59C-9-E1.book 9 ページ ２０１２年６月２６日 火曜日 午前１１時３３分
INSTRUMENT AND CONTROL FUNCTIONS
then goes off.
3. If the oil change indicator does not
come on, have a Yamaha dealer
1
check the electrical circuit.
V-belt replacement indicator
2
"V-Belt"
3
4
1
5
6
1. V-belt replacement indicator "V-Belt"
7
This indicator flashes every 20000 km
(12500 mi) when the V-belt needs to be
8
replaced.
After changing the V-belt, reset the
9
V-belt replacement indicator. To reset
the V-belt replacement indicator, select
it by pushing the left set button until
"V-Belt Trip" is displayed, and then
push the left set button at least one sec-
ond. When pushing the left set button,
All manuals and user guides at all-guides.com
"V-Belt Trip" starts flashing. While
"V-Belt Trip" is flashing, push the left set
button for at least three seconds.
If the V-belt is changed before the
V-belt replacement indicator "V-Belt"
flashes (i.e. before the periodic V-belt
change interval has been reached), the
indicator "V-Belt" must be reset after
the V-belt change for the next periodic
V-belt change to be indicated at the
correct time.
The electrical circuit of the indicator can
be checked according to the following
procedure.
1. Turn the key to "ON" and make
sure that the engine stop switch is
set to " ".
2. Check that the V-belt replacement
indicator comes on for a few sec-
onds and then goes off.
3. If the V-belt replacement indicator
does not come on, have a Yamaha
dealer check the electrical circuit.
3-9
Ambient temperature display, aver-
age fuel consumption, and instan-
taneous fuel consumption modes
1
1. Ambient temperature/average fuel con-
sumption/instantaneous fuel consumption
Push the right set button to switch the
display between the ambient tempera-
ture display "Air", the average fuel con-
sumption mode "AVE_ _._ km/L" or
"AVE_ _._ L/100 km", and the instanta-
neous fuel consumption mode "km/L"
or "L/100 km" in the following order:
Air AVE_ _._ km/L or AVE_ _._ L/
100 km km/L or L/100 km Air
For the UK only:
Push the right set button to switch the
display between the ambient tempera-
Advertisement
Table of Contents
Troubleshooting
