Specifications - Bradford White URG2PV75H N Series Service Manual

UPV75 Series
Power supply
Gas Supply Pipe
Approved Gas
Type
Gas Pressure
Venting System
Approved Vent
Materials
Minimum
Clearance for
Servicing
Water Supply
Pressure
Gas Control
ECO Limit
Residential
Temperature Set
Point Range
Commercial
Temperature Set
Point Range
Blower
Temperature
Switch
Pressure Switch
Blower
6
6
Dedicated 115 VAC, 60 Hz, 15A.
Minimum 1/2" NPT (schedule 40 black iron pipe recommended).
Natural Gas, unit must match gas type supplied.
6.0" W.C. min. for Natural Gas, 14.0" W.C. maximum.
Power vent through the wall or vertical through the roof.
PVC, CPVC or ABS.
18" from top, 24" from front, 4" sides and rear.
150 PSI maximum allowable working pressure. Check local codes for supply
pressure.
Residential 188°F (87°C), Commercial 199°F (93°C).
60°F (16°C) to 160°F (71°C) (approximate temperatures).
80°F (27°C) to 180°F (82°C) (approximate temperatures).
Normally closed, opens @ 155°F (68°C), auto reset @ approximately 135°F (57°C).
Normally open, closes on vacuum increase @ -1.25" W.C.;
Opens on vacuum decrease @ -1.22" W.C.
115 VAC, 60 Hz, 3.1 amps, 3000 RPM.

Specifications