Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS AND OWNER'S HANDBOOK
CAUTION:
All gas burners MUST be installed by trained and licensed technicians.
WARNING:
Installation of this burner must conform with local codes or, in the absence of local codes, with the
Standard for the Installation of Domestic Gas Conversion Burners, ANSI Z21.8-1984, and Addendum,
Z21.8a-1989, and the National Fuel Gas code, ANSI Z223.1-1984, and CAN/CGA B149.1 &.2. If an external
electrical source is utilized, the conversion burner, when installed, must be electrically grounded in ac-
cordance with local codes or, in the absence of local codes, with the national Electrical Code, ANSI/
NFPA No. 70-1990 and CSA Electrical Code.
Owner is required to retain this manual for future reference.
GAS SUPPLY PRESSURES
MANIFOLD PRESSURES
POWER
MOTOR
CONTROL MODULE
WARNING:
If the information in these instructions is not followed exactly, a fire or explosion may result causing
property damage, personal injury or death.
Do not store or use gasoline or any other flammable vapours or liquid in the vicinity of this or any other
appliance.
WHAT TO DO IF YOU SMELL GAS:
1) Do not try to light any appliance.
2) Do not touch electrical switches; do not use any phone in your building.
3) Immediately call your gas supplier from a neighbour's phone.
Follow the gas supplier's instructions.
4) If you cannot reach your gas supplier, call the fire department.
Installation and service must be performed by a qualified installer, service agency or the gas supplier.
2903332
TECHNICAL SPECIFICATIONS
FIRING RATE 38,000 TO 120,000 Btu/hr
2
GB
NATURAL GAS
MIN. 5" wc
MAX. 7" wc
MIN. 3" wc
MAX. 5" wc
120 Volts 60 Hz 1 phase
232T 2.2 Amps 3250 rpm
525 SE/A ELECTRONIC
PROPANE
MIN. 12" wc
MAX. 14" wc
MIN. 3" wc
MAX. 5" wc
Advertisement
Table of Contents
