Installation - Riello RL 28/M Installation, Use And Maintenance Instructions

Kit for long combustion head
Table of Contents

Advertisement

Available languages

Available languages

2

Installation

2.1
Burner equipment supplied with the kit
Nozzle holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
Spacer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 2
Pediment extension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 2
Shutter tie-rod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
Flame funnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
Extension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 2
Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 2
Plastic plug. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 2
2.2
Disassembling the burner from the boiler
Turn off the burner's electrical supply using the
main system switch.
DANGER
Turn off the fuel interception tap.
DANGER
Wait for the components in contact with heat sourc-
es to cool down completely.
To install the long head kit the burner must be disassembled from
the boiler.
Place the burner on the ground and proceed with the installation of
the flame funnel and the shutter tie-rod a shown below:
➤ unscrew the two screws 1)(Fig. 2) and remove the flame fun-
nel 8);
➤ remove the cover of the burner.
2915793
Kit for long combustion head
Spindle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
Plate for extensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
Screw M4x25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 2
Washers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 4
Screw M4x8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 4
Screw M5x6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 2
Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 2
Instruction booklet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . No. 1
1
2
GB
20119851
20119855
Fig. 1
1
8
Fig. 2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rl 38/mRl 50/m301027730102783010279

Table of Contents