Maximum Operating Time; Replacing The Cooking Compartment Bulb On The Ceiling; Glass Cover - Bosch 500 Series Use And Care Manual

Maximum operating time

If you do not change the settings on your appliance for
several hours, the appliance stops heating up
automatically. This prevents unwanted continuous
operation.
The respective settings for the operating mode govern
when the maximum operating time is reached.
Maximum operating time reached
A note appears on the display confirming that the
maximum operating time has been reached.
To continue operation, touch any field or turn the rotary
selector.
Switch the appliance off using the
do not need to use it.
Tip: Set a cooking time so that the appliance does not
switch off when you do not want it to, e.g. with an
extremely long preparation time. The appliance heats up
until the set cooking time has elapsed.
Replacing the cooking compartment bulb
on the ceiling
If the cooking compartment light bulb burns out, it must
be replaced. Heat-resistant, 40 watt, 230 V halogen
bulbs are available from customer service or specialist
retailers.
When handling the halogen bulb, use a dry cloth. This
will increase the service life of the bulb. Only use these
bulbs.
WARNING
9
Light socket is live when door is open if main power
supply is not turned off.
WARNING
9
Make sure the appliance and lights are cool and
power to the appliance has been turned off before
replacing the light bulb(s). Failure to do so could
result in electrical shock or burns. The lenses (if
equipped) must be in place when using the
appliance. The lenses (if equipped) serve to protect
the light bulb from breaking. The lenses (if
equipped) are made of glass. Handle carefully to
avoid breaking. Broken glass can cause an injury.
WARNING
9
RISK OF ELECTRIC SHOCK
When you replace the oven interior lamp, the
contacts of the lamp holder are live. Before
replacing the lamp, remove the power plug or
deactivate the circuit breaker or fuse in the fuse box.
30
ÿ
On/Off button if you
WARNING
9
RISK OF BURNS
The appliance becomes very hot. Never touch the
hot inside surfaces of the oven interior or heating
elements. Always allow the appliance to cool down.
Keep children away.
1. Place a dish towel in the cold cooking compartment to
prevent damage.
2. Turn the glass cover counter-clockwise to remove it
!
(figure ).
3. Pull out the bulb – do not turn it (figure
Insert the new bulb, making sure that the pins are in
the correct position. Push the bulb in firmly.
4. Screw the glass cover back on.
Depending on the appliance model, the glass cover
may have a sealing ring. If the glass cover has a
sealing ring, put it back in place before screwing the
cover back on.
5. Remove the dish towel and switch on the circuit
breaker.

Glass cover

If the glass cover of the halogen bulb is damaged, it
must be replaced. You can obtain a new glass cover
from customer service. Please specify the E number and
FD number of your appliance.
"
).