Table of Contents
Advertisement
Digital Shrink & Shift
Shrinks projected image digitally and shifts the image in available projection area.
• Digital Shrink: Press OK to activate the adjusting bar.
Image
Resizing
• Shift: Only available when shrink is applied.
Blanking
B lanks the chosen pixels from the selected sides.
It provides 3 screen aspect ratios for user to choose from. The native resolution
will change according to users' selection.
• 16:10
• 16:9: Native resolution in Information page should show 1920x1080 accordingly.
Screen Fill
• 4:3:
• 1:1:
Digital Lens
Adjusts the image position horizontally.
Shift
E nables or disables the Fast M ode. Fast mode is a mode created for low latency.
• When Fast mode is activated, the system will automatically set Aspect Ratio/HV
Fast Mode
• When Fast mode is disabled, the system should recover the settings of Aspect
Returns all of the adjustments you' ve made for the Display menu to the factory
Reset Display
preset values.
Network
Wired LAN
See
AMX Device
When AM X Device Discovery is On, the projector can be detected by AM X
controller.
Discovery
MAC Address
Displays the M ac Address for this projector.
(Wired)
Settings
Projector
See
Installation
1. Native resolution in Information page should show 1728 x 1080 accordingly.
2. Projection of all aspect ratios should be limited in 1728 x 1080 range.
1. Native resolution in Information page should show 1440 x 1080 accordingly.
2. Projection of all aspect ratios should be limited in 1440 x 1080 range.
1.Native resolution in Information page should show 1080 x 1080 accordingly.
2.Projection of all aspect ratios should be limited in 1080 x 1080 range.
Keystone/Corner Fit/Digital Zoom/Digital Shrink & Shift/B lanking/Overscan back
to default and gray out these items.
Ratio/HV Keystone/Corner Fit/Digital Zoom/Digital Shrink &
Shift/B lanking/Overscan to the status before Fast mode is activated.
Controlling the projector via L AN on page
Choosing a location on page
25.
12.
M enu operation
33
Advertisement
Table of Contents
