Table of Contents
Advertisement
Advanced menu
Picture
Picture Mode
See
There are 2 user-definable modes if the current available picture modes are not
suitable for your need. Y ou can use one of the picture modes (except the User
1/User 2) as a starting point and customize the settings.
1. Go to Picture > Picture Mode.
Reference
2. Press
Mode
3. Press
4. Press
The higher the value, the brighter the image. Adjust this control so the black areas
Brightness
of the image appear just as black and that detail in the dark areas is visible.
The higher the value, the greater the contrast. Use this to set the peak white level
Contrast
after you have previously adjusted the B rightness setting to suit your selected input
and viewing environment.
L ower setting produces less saturated colors. If the setting is too high, colors on
Color
the image will be overpowering, which makes the image unrealistic.
The higher the value, the more greenish the picture becomes. The lower the value,
Tint
the more reddish the picture becomes.
Sharpness
The higher the value, the sharper the picture becomes.
This feature utilizes a new color-processing algorithm and system level
enhancements to enable higher brightness while providing truer, more vibrant
colors in picture. It enables a greater than 50% brightness increase in mid-tone
Brilliant Color
images, which are common in video and natural scenes, so the projector
reproduces images in realistic and true colors. If you prefer images with that quality,
select On.
When Off is selected, the Color Temperature function is not available.
Picture M ode on page
/
to select User 1 or User 2.
to highlight Reference Mode, and press
mode that is closest to your need.
to select a menu item to be changed and adjust the value. The
adjustments define the selected user mode.
28.
/
to select a picture
M enu operation
29
Advertisement
Table of Contents
