Siemens SIREMOBIL Compact Installation And Setting Instructions Manual page 3

Connecting laser camera
Video
Out1
OTV
Fig. 1
a
1
Fig. 3
CAUTION
Mechanical installation of the video separator device
•
Install the video separator device (OTV) as indicated in Fig. 1.
Use the mounting bracket and secure it with the two threaded bolts.
The video sockets should point toward the back of the monitor trolley.
Installing the isolated video socket and remote release socket
•
Drill two holes using the dimensions indicated in Fig. 2. The left one should be 17 mm for
the video socket and the right one should be 16 mm for the remote release socket.
•
Insert the remote release socket in the right hole as a drilling template and then drill both
of the 3 mm attachment holes.
•
Install the video socket according to Fig. 2 in the left hole (isolated).
•
Subsequently, use a DMM to test whether the video socket is isolated.
Siemens AG
Medical Engineering
in
Out2
Out3
X2
s
2
d
3
Disconnect the SIREMOBIL Compact from power
prior to beginning the work.
Register 3
140
80
20
Fig. 2
RXR2-130.033.02
Rev. 02 03.97
Remote release socket
Video socket
Threaded bolt
Page 3 of 8 SIREMOBIL Compact
TD SP 1
3
1
1