Page 2
Congratulations on purchasing your new Hunter ceiling fan! ® The ceiling fan you purchased will provide comfort and performance in your home or office for many years. This instruction manual contains complete instructions for installing and operating your fan. We are proud of our work and appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world.
Tools Needed for Installation Box Outlet Mount Building Structure Mount 9/64" Box Contents Hardware Included Parts Included Cradle Canopy Mount Canopy Remote Screw x2 Cradle Bracket Remote Fan Body Tape Remote Drywall Anchor x2 Small Flat Head Screwdriver Snap-on Blades Wood Screw x2 Washer x2 Glass Cover...
Before Beginning Installation Standard Mount This installation is for flat ceilings using the short pre-installed Turn Power OFF, breaker and light switch. downrod ceiling fans. WARNING IMPORTANT The longest accessory downrod that can be used with To avoid possible electrical shock, before installing your fan, fans is 12-inches.
Installation – Canopy Mount and Terminal Wiring 1a 1a Building Structure Mount Building Structure Mount • You must be able to secure the fan to building structure or fan-rated outlet box. • You have two options for installation. Pick which one works best for your location.
Page 6
Installation – Canopy Mount and Terminal Wiring (continued) Single Switch Wiring Single Switch Wiring Connect wiring from ceiling to terminal block (on side of canopy mount) and tighten using flathead screwdriver (included). Green, Green Yellow Stripe, or Bare (grounding) Green, Green Yellow Stripe, or Bare (grounding) WARNING White (grounded) White (grounded)
Page 7
Installation – Fan Body, Wiring Harness, Canopy Cover, and Blades NOTICE To prevent damage to fan, ALWAYS lift holding either the fan housing or the downrod. Connect wiring harness from canopy mount (A) to wiring harness Install snap-on canopy (B) over downrod on fan body (C). Place the down from fan body (C).
Page 8
Installation – Glass Cover Align, lift and twist to lock glass cover (E) to bottom of fan assembly (C). WARNING GLASS FALL HAZARD To prevent SERIOUS INJURY or DEATH, make sure that glass is properly secured.
Page 9
Installation – Remote Cradle Screw Mount Option Screw Mount Option Adhesive Option Adhesive Option Remove cradle (G) from cradle bracket (H). Separate lining from Remove cradle (G) from cradle bracket (H). Drill two 9/64" holes, back of adhesive (I). Press cradle bracket (H) against wall for install cradle bracket (H) to wall with drywall anchors (BB) and 30 seconds.
Page 10
Installation - Final Turn Power ON, breaker and main switch. Operation – Remote NOTICE Remote Function Guide Key Press Function • Always purchase the + Quick Press Light On/Off correct size and grade of battery most suitable for + Long Press Light Dimming the intended use.
Hunter instructions, accidental damage caused by the fan owner or related parties, Please do not ship your fan or any fan parts to Hunter. Delivery will be refused. modifications to the fan, improper or incorrectly performed maintenance or repair,...