Table of Contents
Advertisement
configuration on the first use of the monitor, so you can switch scenarios easily without further hasty
setup.
An example of monitor use in
different scenarios
Welcome
Please select a scenario
Color Mode: Standard
Audio mode: Game
Input
Quick Menu
Color Mode
Eye Care
Audio
System
Back
1. Connect the input sources to the monitor properly as instructed in
14.
2. Select a scenario for an available input source. The scenario changes with the input source. If your
skip the configuration now, the scenario is preset to be Game for each input source. You can
change the setting from Menu > Input later.
3. To switch an input source / scenario, press the looping key. See
looping key on page 29
• You are prompted to complete the configuration again after a system reset from Menu > System > Reset All.
• If you have switched off the scenario configuration from Menu > Input > Scenario, the scenario of each input is
set to be Standard by default.
Switching the inputs quickly with the looping key
1. Press the looping key to bring up the input source selection menu. Each source is preset for a scenario
as described in
Setting up your monitor for different scenarios on page
the input source.
For movie watching
HDMI 1: Game
HDMI 2: Game
DP: Game
Scenario
Move
for more information.
For console gaming
HDR: OFF
FreeSync Premium: On
Standard
Game
Cinema
Confirm
Switching the inputs quickly with the
29
For PC gaming
1920 x 1080
144 Hz
Connect the video cable. on page
28. The scenario changes with
Advertisement
Table of Contents
