Table of Contents
Advertisement
configuration on the first use of the monitor, so you can switch scenarios easily without further hasty
setup.
An example of monitor use in
different scenarios
Please select a scenario
Color Mode: Custom
Audio mode: RCG
Input
Quick Menu
Color Mode
Eye Care
Audio
Lighting
System
Back
1. Connect the input sources to the monitor properly as instructed in
19.
2. Select a scenario for an available input source. The scenario changes with the input source. If you
skip the configuration now, the scenario is preset to be Game for each input source. You can
change the setting from Menu > Input later.
3. To switch an input source / scenario, press the looping key. See
34
for more information.
• You are prompted to complete the configuration again after a system reset from Menu > System > Reset All.
• If you have switched off the scenario configuration from Menu > Input > Scenario, the scenario of each input is
set to be Standard by default.
Switching the inputs quickly
1. Press the looping key on the monitor or the
source selection menu. Each source is preset for a scenario as described in
for different scenarios on page
For movie watching
HDMI 1: Game
HDMI 2: Game
DP: Game
Scenario
Move
33. The scenario changes with the input source.
For console gaming
HDR: OFF
FreeSync Premium Pro: On
Standard
Game
Cinema
Confirm
Switching the inputs quickly on page
key on the remote control to bring up the input
34
For PC gaming
2560 x 1440
165 Hz
Connect the video cable. on page
Setting up your monitor
Advertisement
Table of Contents
