Table of Contents
Advertisement
Power safety
Please follow these safety instructions for best performance, and long life for your monitor.
• The AC plug isolates this equipment from the AC supply.
• The power supply cord serves as a power disconnect device for pluggable equipment. The socket outlet
should be installed near the equipment and be easily accessible.
• This product should be operated from the type of power indicated on the marked label. If you are not
sure of the type of power available, consult your dealer or local power company.
• The Class I pluggable equipment Type A must be connected to protective earth.
• An approved power cord greater or equal to H03VV-F or H05VV-F, 2G or 3G, 0.75mm
• Use only the power cord provided by BenQ. Never use a power cord that appears to be damaged or
frayed.
For Germany only:
• (If the weight of the product is less than or equal to 3 kg) An approved power cord greater or equal to
H03VV-F, 3G, 0.75mm
• (If the weight of the product is more than 3 kg) An approved power cord greater or equal to H05VV-F
or H05RR-F, 3G, 0.75mm
• (If a remote control is provided) RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
For models with adapter:
• Use only the power adapter supplied with your LCD Monitor. Use of another type of power adapter
will result in malfunction and/or danger.
• Allow adequate ventilation around the adapter when using it to operate the device or charge the
battery. Do not cover the power adapter with paper or other objects that will reduce cooling. Do not
use the power adapter while it is inside a carrying case.
• Connect the power adapter to a proper power source.
• Do not attempt to service the power adapter. There are no service parts inside. Replace the unit if it is
damaged or exposed to excess moisture.
Care and cleaning
• Do not place the monitor face down on the floor or a desk surface directly. Otherwise, scratches on
the panel surface may occur.
• The equipment is to be secured to the building structure before operation.
• (For models that support wall or ceiling mounting)
• Install your monitor and monitor mounting kit on a wall with flat surface.
• Ensure that the wall material and the standard wall mount bracket (purchased separately) are stable enough
to support the weight of the monitor.
• Turn off the monitor and the power before disconnecting the cables from the LCD monitor.
2
must be used.
2
must be used.
0-40°C
10-90% 0-3000m
4
-20-60°C
10-60% 0-12000m
2
must be used.
Advertisement
Table of Contents
