Table of Contents
Advertisement
Making a Ready Link Call by Entering a Number
To place a Ready Link call by entering a number:
1.
From standby mode, enter the Ready Link number you want to
dial.
2.
Press
to take the floor and speak.
3.
Continue with the Ready Link call, pressing and holding
speak and releasing it to allow others to reply.
4.
When the call is finished, press
– or –
1.
Press R-Link (left softkey) or press
List.
2.
Press Go to (left softkey), highlight Enter R-Link# and press
3.
Enter the Ready Link number you want to dial.
4.
Follow steps 2-4 above.
Note:
Ready Link numbers must contain ten digits (area code + phone number).
Your Ready Link number is the same as your wireless phone number.
Missed Call Notification for Ready Link Calls
When an incoming Ready Link call is not answered, the Missed Call
Notification is displayed on your screen.
To call the last Missed Ready Link call:
Simply press and hold
displayed. (Continue with the Ready Link call as described
previously.)
To display the Missed Ready Link Call Log:
Press View (left softkey). To call the entry, highlight the entry
you want to call, and press and hold
Ready Link call as described previously.)
Note:
When you display Missed Calls entries, you will see the
name. The
from the entry. The
Section 2J: Using Ready Link
to place the Ready Link call. Continue holding
The contact's name appears on the display if there is a
matched number in your Ready Link List.
icon will remain until you make or receive a Ready Link call to or
icon appears next to the new missed call entry.
.
to access the Ready Link
while the Missed Call Notification is
. (Continue with the
to
.
icon next to the
135
Advertisement
Table of Contents
