Table of Contents
Advertisement
Making a Ready Link Call by Entering a Number
To place a Ready Link call by entering a number:
1.
From standby mode, enter the Ready Link number you want to
dial.
2.
Press
to take the floor and speak.)
3.
Continue with the Ready Link call, pressing and holding
speak and releasing it to allow others to reply.
4.
When the call is finished, press
– or –
1.
Press R-Link (left softkey) or press
2.
Press Go to (left softkey), highlight Enter R-Link# and press
3.
Enter the Ready Link number you want to dial.
4.
Follow steps 2-4 above.
Note:
Ready Link numbers must contain 10 digits (area code + phone number) or
11 digits (1 + area code + phone number). Your Ready Link number is the same as
your wireless phone number.
Section 2J: Using Ready Link
to place the Ready Link call. (Continue holding
The contact's name appears on the display if there is a
matched number in your Ready Link List.
.
.
to
.
129
Advertisement
Table of Contents
