Table of Contents
Advertisement
Setting the Flash Function
To activate the flash function:
1.
With the phone open and in camera mode, press Options (right
softkey).
2.
Select Flash and press
3.
Select an option from the following and press
4.
Take a picture using the phone's main LCD as a viewfinder.
Tip:
When the phone is open and in camera mode, press
between flash modes.
Setting the Self-timer
To activate the Self-timer:
1.
With the phone open and in camera mode, press Options (right
softkey).
2.
Highlight Self-timer and press
3.
Highlight the length of delay you want the timer to use
(10 seconds or 5 seconds) and press
4.
Press Start (left softkey) when you are ready to start the timer.
(
the Self-timer countdown.)
5.
Get ready for the picture. (When the timer is down to three
seconds, the Self-timer icon will turn red and the phone will
begin to beep.)
Note:
After taking a picture, Self-timer settings return to their default settings.
To cancel the Self-timer after it has started:
Press Cancel (right softkey).
Note:
While the Self-timer is active, all keys are disabled except
(right softkey).
Cancel
Section 2K: Using Your Phone's Built-in Camera
On This Shot to activate the flash for one shot.
On Always to activate the flash all the time.
Auto to activate the flash automatically.
To deactivate this feature, select Off during step 3.
appears on the lower left portion of the main LCD during
.
.
.
.
to switch
,
, and
153
Advertisement
Table of Contents
